FleetPulsePRO Telematics Device Manual
Maximize the benefits of your FleetPulsePRO telematics device with this detailed manual for improved vehicle monitoring and efficiency.
Written by Randy French
Updated at August 14th, 2025
Table of Contents
FleetPulsePRO
Manual
August 2025
1. Introduction
FleetPulsePRO is a feature-rich, hardwired solution providing a steady stream of insights from mile one.
The FleetPulsePRO system puts all that is necessary to make swift, data-informed solutions at your fingertips, saving time, cost and a significant reduction in delayed response to customers.
FleetPulsePRO’s flexible and open API ensures third-party compatibility, expandable functionality and interoperability in the future, providing peace of mind around the investments you make to digitally transform how you manage your fleet.
1.1. FleetPulsePRO Features
CAN Harness |
Hub Rotation Mileage
|
Tethered Status |
Rear Axle Weight
|
GPS & Motion |
Battery Status
|
Load Status |
ABS Fault Codes
|
Door Events |
Tire Inflation
|
Light Out
|
Reefer Integration*
|
Scan tool detect |
550mAh battery backup |
User Defined Geo-Fence |
6 degrees of Freedom (3D accelerometer & 3D gyroscope) |
Location Determination & Breadcrumbing |
Idle State |
2. Gateway Hardware Specifications
GPS Device Specs |
Environmental Specs |
Position Accuracy: 3m |
Operating Temperature: -40° to 85°C |
Hot Start Acquisition: ~2 secs |
Storage Temperature: -40° to 85°C |
Tracking Sensitivity: ~160 dBm |
Battery load dump protected |
Acquisition Sensitivity: ~146 dBm |
ESD immunity |
Update Rate: 1Hz |
EMC/EMI: CISPR 25; Industry Canada |
|
SAE J1455 Level 1 Pressure Wash |
|
IP67 |
Data Communication |
Updates & Configurations |
SMS |
Over-the-Air Firmware |
UDP |
Over-the-Air Configuration |
Bluetooth |
|
USB |
|
Electrical Specs |
Memory |
Operating Voltage: 12V and 24V Systems |
30-90 Day Store-Forward Capabilities |
Antennas |
Input/Output |
Internal or External Cellular |
Status LEDs: Red, Amber, Green & Blue |
Internal or External GPS |
Twilight Sensor: Dimming LED’s |
|
Diagnostic Port: USB |
|
Digital I/O (Maximums) Analog Input (6) Digital Inputs (STB / STG) 5V Output Digital Output |
Physical Specs |
Certifications |
Dimensions (Metric): Approx 15.5cm x 7.5cm x 3.1cm |
PTCRB |
Dimensions (US): Approx. 6” x 3” x 1.25” |
FCC/IC |
Weight: 0.6 lbs./0.275kg |
4G LTE AT&T |
|
RoHS compliant |
|
FM Class 1, Div 2 Non-incendiary |
Vehicle Interface | |
(2) CAN 250k, 500k |
KWP2000 |
j1708 |
J1850 VPW & PWM |
ISO9141-2 |
Vehicle Protocols J1939 J1587 |
3. Installation
3.1. Set up, Tools, and Materials
Safety Glasses |
Fish Tape |
Nitrile Gloves |
Putty Knife |
Power Drill |
Rivet Gun |
Bits – 5/8” and 3/16” |
Ink marker |
Clean Rags |
2 Rivet Clamps |
Scotch Pad |
Wire Loom |
9/16” socket/Ratchet and Wrench |
99% Isopropyl alcohol |
8mm” or 5/16” Wrench |
Electrical Tape |
Plastic Stick-on Clamps |
Plastic Zip Ties |
3.2. FleetPulsePRO Device Installation
The FleetPulsePRO system is installed by the trailer OEM.
3.3. Solar Panel Installation
Step |
Estimated installation time |
Set up of Tools and safety equipment: |
20 Minutes |
Disconnect MC4: |
2 Minutes |
Clean and Prep area for install on roof: |
10 Minutes |
Drill hole and install panel on roof: |
5 Minutes |
Wire cover epoxy cure time: |
3 hours (items below can continue during cure) |
Secure wire inside trailer: |
15 Minutes |
Route wires to underside of trailer: |
10 Minutes |
Route wires to the battery box: |
20 Minutes |
Attach wires to battery and reinstall battery into battery box |
15 Minutes |
Reattach MC4:
|
2 Minutes |
3.4. Preparation for Installation
Using 99% Isopropyl alcohol and a clean rag, thoroughly clean the area in which the panel and wire cover will be installed.
May need a putty knife to assist with the removal of any excess sealant or debris before installation.
Use a Scotch pride pad to lightly scour the roof.
Ensure that the area is clean and dry completely before moving to the next step.
3.5. Solar Panel Installation Location
- Locate the solar panel as close to the edge as possible without adherence being interfered with by the sealant on the edge of the roof of the trailer (forward roadside corner of the roof of the trailer) approximately 2 inches measuring from the edge sealant.
- Using a sharpie, outline the location of the panel to run a wire to a nose rail.
3.6. Drill 5/8 Hole Necessary For Installation
- Using a drill and 5/8 bit along with the sharpie mark drawn around the location.
-
After the hole is drilled, begin to feed wire through the hole for the continuation of the installation.
- Use electrical trap to tape the open terminals while running the cables through the trailer.
- Disconnect inline fuse holder prior to attempting to run wire through 5/8 hole.
- Using a drill and 5/8 bit along with the sharpie mark drawn around the location.
- Disconnect the inline fuse holder before attempting to run wire through 5/8 of the hole.
- Add a rivet clamp to hold the cable.
- Use wire loom to cover the wire.
3.7. Solar Panel Installation
- Carefully remove all the paper backing from the solar panel- Adhesive is quite strong; therefore, paper may tear around rivet area and be careful to remove all paper from adhesive side of panel.
- Use outline to carefully install panel
- Install from one end to the other carefully removing air bubbles from under panel as you install.
- Firmly press panel to rood to ensure proper adhesion.
3.8. Wire Cover Installation
- If 3M double tape pre-installed on button side of plastic cover flange.
- Peel off paper backing.
- Then remove tape altogether by rolling/wadding off the plastic with fingers
- Clean the bottom side of the plastic cover flange with denatured alcohol and the paper towel and let dry.
- Apply 2-part epoxy (Manus Flexweld 25) via double-barrel caulk gun and mixing nozzle to bottom side of plastic cover flange.
- Smooth out epoxy with disposable tongue depressor (or some other means) over entire flange surface.
- Use sharpie outline to position cover and gently press into place on roof sheet.
- Some epoxy will naturally ooze out of cover.
- Add approximately two pounds of weight to top of cover to retain pressure during epoxy curing.
- Cure for 3 hours indoors at room temperature (can work on wire routing at this time but beware weight on roof of trailer).
- After the epoxy cures, use a caulking gun and sealant to apply sealant around the cover, paying special attention to the area between the cover and the solar panel. This will assist in ensuring water resistance and maintaining water resistance.
3.9. Running the Solar Panel Wire To the Battery
- Use a drill and bit (size depending on the zip tie to be used) to drill holes no more than 2 ft apart and secure wires to back of plywood in front of trailer interior.
- You can use rivet clamp and run it through rails behind plywood for a safer direction
- Once wire is through the roof to the inside of trailer, Wires must be run through the floor of trailer to outside through the main beam
- Note: It is helpful to use fishing wire from outside of the trailer through the hole shown below, then attach wires to be routed using electrical tape and pull the wires through to the underside of the trailer.
- Wires are to be routed through the main beam conduit.
- Wires need to follow the path of the battery cable on the roadside.
3.10. Connecting the Solar Panel To the Battery.
- Remove the battery cover plate.
- Remove battery from battery box.
- Feed wires to the battery from the solar panel through the hole in the battery cover.
- Attach the inline fuse holder (red in color) to wire and reattach wires to battery (red to positive and black to negative terminals)
- Place battery inside cover.
- Slide battery and cover back into battery box and reinstall battery.
4. Device Pairing Process
NOTE: Download the FleetPulse mobile app on your mobile device. If you do not have login credentials, contact support@fleetpulse.com
How to Pair a FleetPulsePRO/Base/Base+
Prerequisite: To perform this function, you must be assigned as an Installer of the customer account.
 |
|
|
|
|
 |
IMPORTANT NOTE
-
Before the device can transmit updates to the platform:
- It must be connected to at least 13V to power it on.
- It must establish a GPS fix and connect to a cellular network.
- Signal acquisition is highly dependent on the device’s location and the strength of GPS and cellular signals in the area.
- If any sensors do not report, inspect the cabling and device for damage.
- Contact support@fleetpulse.com if you have further questions.
Download a copy here:
5. Troubleshooting
FleetPulsePRO Reporting Troubleshooting Guide
6. LED Descriptions
LED |
TEST |
DESCRIPTION |
RED |
POWER |
Device Power |
YELLOW |
GPS |
GPS Location Fix |
GREEN |
COMM |
GSM Communication Test |
BLUE |
VDM |
Vehicle Bus Detection |
# |
LED |
TEST |
LED STATUS |
DESCRIPTION |
0 |
ALL |
- |
OFF |
Device is Not Powered, Test has NOT started |
1 |
RED |
POWER |
SOLID |
Device is Powered |
SLOW FLASHING |
For MC-4+ the Battery is Charging |
|||
2 |
YELLOW |
GPS |
SLOW FLASHING |
GPS Location Fix Test Begin. |
3 |
YELLOW |
GPS |
FAST FLASHING |
GPS Location Fix Test Failed |
SOLID |
GPS Location Fix Test Passed |
|||
4 |
GREEN |
COMM |
SLOW |
GSM Communication Test Begin |
FAST FLASHING |
GSM Communication Failed |
|||
5 |
GREEN |
COMM |
FAST FLASHING |
GSM Communication Failed |
SOLID |
GSM Communication Passed |
|||
6 |
BLUE |
VDM |
SLOW FLASHING |
Vehicle Bus Test Begin |
7 |
BLUE |
VDM |
FAST |
Vehicle Bus Test Failed |
SOLID FLASHING |
Vehicle Bus Test Failed
|
|||
8 |
ALL |
- |
CURRENT |
Keep ALL LEDs in the current state before starting normal device operations. |
7. Reporting
Tethered (External Power >= 13V) |
Untethered (No external power) |
Event Based |
These sensors will report every five minutes: Location Load Status Odometer ABS Tether Status Tire Inflation Status Lights |
These sensors will report once every 24hrs: Location Tether Status Trailer Battery |
These sensors will report upon event triggers: Truck Engine ON / OFF Door Open / Closed Battery Update |
8. Product Maintenance
FleetPulse recommends checking the following items every 12 months:
Data Quality Check
All Sensors should report as expected on the FleetPulse platform (Dashboard). Connectivity Status should be green and displayed as “Good”. If any sensors are not reporting, please review all cabling and connecting pins for damage or corrosion. Contact support@fleetpulse.com for troubleshooting help.
Inspect PRO Gateway and Wiring
Check for physical damage on PRO Gateway and connecting cable on vehicle. Check connection to cable and ensure blue collar connector is in “Locked” position or pushed up.
Clean Solar Panel and Inspect Wiring
Inspect solar panel for damage or wear and wipe clean with a dry cloth. A 50/50 mix of isopropyl alcohol and water can be used to clean the solar panel. Inspect wiring from solar panel to battery for looseness, abrasions or chaffing. Solar panel should be secure to roof of trailer and wiring should be secure, away from moving parts, and have no wear present.
Inspect PRO Wiring Under Trailer
Inspect accessible or exposed wiring, connections, and secureness to components from front to rear of trailer for looseness, abrasions, chaffing or corrosion. All wiring should be secure, connectors completely connected, and no wear or corrosion present throughout.
Inspect and Test Battery
Inspect battery brackets for looseness and battery cover for damage. Battery can be removed and load tested without solar panel wiring connected to terminals. Ensure 7-way J560 plug power is disconnected when testing battery. Battery should test in good condition; terminals clean, no corrosion present, and wiring terminals fastened appropriately.
Inspect Door Sensor
Confirm door sensor hardware on door and trailer is fastened and not moveable. Inspect sensor wiring for looseness, abrasions or chaffing. Door sensor wiring should be secure, away from moving door parts, and have no wear present.
9. Warranty
Disclaimer
Used parts must be returned within 30 days of FleetPulse or the manufacturer shipping new replacement parts. If the used part is not returned on time, the company requesting a warranty will be billed for a new part, including shipping and handling.
The customer is responsible for paying the shipping costs of used parts.
FleetPulse or its supplier manufacturers reserve the right to deny any claims if parts are found to be functional, past the warranty period, damaged due to customer abuse, failed because of operational hazards, disassembled, or due to other non-OE causes.
PRO Telematics Gateway: Parts List
Part Description |
FleetPulse Part Number |
Supplier Part Number |
PRO Telematics Gateway (Wabco Compatible) |
41300637 |
10X91996-009 |
PRO Nose Box w/Light Out Detection Guardian Harness |
41321260 |
01-8729-70
|
PRO Battery Mount Cradle |
40105399 |
40106868G00 |
PRO Battery Mount Retainer |
40104364 |
40106869G00 |
PRO Nose Box Power Supply Harness 5.5ft |
41300894 |
01-6643-F3 |
PRO Squid Harness |
41301012 |
01-6752-X7 |
PRO Door Sensor Jumper Harness 70ft |
41300897 |
01-6644-83 |
PRO ABS Data Jumper Harness 53ft |
41300898 |
01-6643-E8 |
PRO Battery Fuse Harness |
41300899 |
01-6643-F5 |
PRO ABS Data Cable iABS 3m |
41300900 |
01-6643-E9 |
PRO iABS T-Harness iABS/Tiremaxx 1m |
40500292 |
WBCO 449 025 010 0 |
PRO Telematics Gateway Connector Harness |
41301065 |
01-6630-E6 |
PRO Battery Jumper Harness 20ft |
41300951 |
01-6643-F4 |
PRO Door Sensor Harness 3.6m w/Rollup Sensor |
41300952 |
01-6643-F6 |
PRO TIS Jumper Harness iABS GIO1 1m |
40513214 |
WBCO 449 743 010 0 |
PRO Weight Sensor Cable iABS GIO2 1m |
40513215 |
WBCO 449 826 010 0 |
PRO Weight Sensor iABS |
41904178 |
WBCO 441 044 106 0 |
PRO Light Out Detection Data Cable 5.5ft |
41300895 |
01-6643-F2 |
PRO Swing Door Sensor Bracket |
41800192 |
41800192 |
PRO Light Out Detection Guardian Harness |
41321259 |
01-8737-02 |
PRO 12V Battery Plastic Cover |
41301038 |
P-80-157 |
PRO 12V Battery Lead Acid |
41321365 |
ML22-12 |
PRO 12.8V Battery Lithium |
00001812 |
ML18-12LI |
PRO Solar Panel 30ft Dry Van or Retrofit Reefer |
41800637 |
R3-12F13.7VBGD |
PRO Solar Panel 15ft Reefer |
41800827 |
R3-12F13.7VBGDA |
PRO Multiple Door Sensor T-Harness |
41300963 |
01-6646-95 |
PRO TIS Jumper Harness iABS GIO1 3m |
40500293 |
WBCO 449 743 030 0 |
PRO Weight Sensor Cable iABS GIO2 3m |
40500297 |
WBCO 449 826 030 0 |
PRO ABS Data Cable iABS 16ft |
41300999 |
01-6646-U8 |
PRO TIS T-Harness TABS6/Tiremaxx |
40282418 |
K282418 |
PRO Telematics Gateway (Bendix Compatible) |
41300644 |
10X91996-012 |
PRO Telematics Gateway: Warranty and Parts
Morey Corporation
Part Name |
FleetPulse Part Number |
Supplier Part Number |
Warranty Time Frame |
PRO Telematics Gateway (Wabco Compatible) |
41300637 |
10X91996-009 |
3 Years |
PRO Telematics Gateway (Bendix Compatible) |
41300644 |
10X91996-012 |
3 Years |
Morey Warranty Replacement
If a part issue is diagnosed, here are steps to be taken to receive a warranty replacement:
Customers will need to unpair the FleetPulsePRO via the FleetPulse mobile application or submit a request to FleetPulse Support at support@fleetpulse.com with the following information: Asset VIN, Device Serial Number, and Unit ID Shipping address of new device Customers will be able to move forward by pairing their new device through our FleetPulse Mobile App once it has been received. If unable, contact FleetPulse Support for assistance. Keep possession of old device so that it can be returned to the manufacturer. Placing the old device in the same box as the new device is recommended. Add a note with the old device in the box containing: Customer company name Customer address Name, email, and phone number of person responsible for the warranty request
|
Manufacturer RMA Shipping: Morey Corporation 100 Morey Dr. Woodridge, IL 60517 ATTN: Elvira Garduno 630-754-2855
|
Grote Industries
Part Description |
FleetPulse Part Number |
Supplier Part number |
Warranty time Frame |
PRO Nose Box w/Light Out Detection Guardian Harness |
41321260 |
01-8729-70 |
5 Years |
PRO Nose Box Power Supply Harness 5.5ft |
41300894 |
01-6643-F3 |
10 Years |
PRO Squid Harness |
41301012 |
01-6752-X7 |
10 Years |
PRO Door Sensor Jumper Harness 70ft |
41300897 |
01-6644-83 |
10 Years |
PRO ABS Data Jumper Harness 53ft |
41300898 |
01-6643-E8 |
10 Years |
PRO Battery Fuse Harness |
41300899 |
01-6643-F5 |
10 Years |
PRO ABS Data Cable iABS 3m |
41300900 |
01-6643-E9 |
10 Years |
PRO Telematics Gateway Connector Harness |
41301065 |
01-6630-E6 |
10 Years |
PRO Battery Jumper Harness 20ft |
41300951 |
01-6643-F4 |
10 Years |
PRO ABS Data Cable iABS 16ft |
41300999 |
01-6646-U8 |
10 Years |
PRO Door Sensor Harness 3.6m w/Rollup Sensor |
41300952 |
01-6643-F6 |
10 Years |
PRO Light Out Detection Data Cable 5.5ft |
41300895 |
01-6643-F2 |
10 Years |
PRO Light Out Detection Guardian Harness |
41321259 |
01-8737-02 |
5 Years |
PRO Multiple Door Sensor T-Harness |
41300999 |
01-6646-U8 |
10 Years |
Grote Warranty Replacement
If a part issue is diagnosed, here are steps to be taken to receive a warranty replacement:
- Contact the Grote Customer Service department at 800-628-0809 to request a replacement. All claims considered for warranty will be based upon 100% parts return. There will be a charge for any replacement parts when they ship. However, this charge will be canceled once the returns are received.
-
Once you receive the RGA # and the shipping label by Grote, send old parts to 2600 Lanier Dr. Madison, IN 47250 please be sure to enclose all appropriate documentation that list all parts being returned. Details defined below:
- Please be sure to write the RGA # on the outside of the box.
- On a sheet of paper document trailer VIN, contact information and address, claim date, and all Grote part numbers being returned.
- If claiming labor hours, the customer MUST include labor rate and hours.
Corrosion / Weather Effects
Corrosion or any weather-related effect on parts are not covered under Grote’s long-life warranty policy. If the customer desires to still process a warranty claim on part failure due to corrosion, contact Grote Customer Service and an exception may be determined based on their decision.
PRO Sensors: Warranty and Parts
ZF/WABCO
Parts Description |
FleetPulse Part Number |
|
Supplier Part Number |
Warranty Time Frame |
PRO TIS T-Harness iABS/Tiremaxx 1m |
40500292 |
|
WBCO 449 025 010 0 |
3 years / 300k Miles from time of Service |
PRO TIS Jumper Harness iABS GIO1 1m |
40513214 |
|
WBCO 449 743 010 0 |
3 years / 300k Miles from time of Service |
PRO Weight Sensor Cable iABS GIO2 1m |
40513215 |
|
WBCO 449 826 010 0 |
3 years / 300k Miles from time of Service |
PRO Weight Sensor iABS |
41904178 |
|
WBCO 441 044 106 0 |
3 years / 300k Miles from time of Service |
PRO TIS Jumper Harness iABS GIO1 3m |
40500293 |
|
WBCO 449 743 030 0 |
3 years / 300k Miles from time of Service |
PRO Weight Sensor Cable iABS GIO2 3m |
40500297 |
|
WBCO 449 826 030 0 |
3 years / 300k Miles from time of Service |
ZF/WABCO Warranty Replacement
Warranty shall not apply to the following, but not limited to:
Damage to product or components caused by incorrect use, installation, maintenance or repair, improper fit of mating, cut, broken, chafed, pinched damaged wiring (sensors, harnesses or connectors) damaged in removal or associated with non-genuine WABCO components or material, unauthorized disassembly of product or components, obliterated, defaced or missing name plate, serial numbers or label identification, changes in sealed adjustments, attempted repair of non-serviceable component, damage resulting from corrosion.
For all other warranties contact WABCO/ZF at:
Customer Care Center @ (844-732-2493) US/Canada
(800) 953-0248 (Mexico) NACustomerCare.ZF@zf.com.
The ZF/WABCO Customer Care Center will provide steps to be taken in shipping failed part and receiving new part.
ZF/WABCO Address:
1220 Pacific Drive
Auburn Hills, MI 48236
Bendix
Parts Description |
FleetPulse Part Number |
Supplier Part Number |
Warranty Time Frame |
PRO TIS T-Harness TABS6/Tiremaxx |
40282418 |
K282418 |
1 Year |
Bendix Warranty Replacement
Bendix warrants their parts for 1-year. To obtain or request warranty:
Vehicle Dealers are to log into the Bendix Warranty Portal at b2bendix.com and complete a claim.
Parts Dealers are to log onto the Bendix Warranty Portal at b2bendix.com and complete a claim.
NOTE: Ensure to use approved dealers closest to your location. If labor costs are to be included, ensure to include labor rates and time for replacing the part.
PRO Solar Charging System: Warranty and Parts
PowerFilm Solar
Parts Description |
FleetPulse Part Number |
Supplier Part Number |
Warranty Time Frame |
PRO Solar Panel 30ft Dry Van or Retrofit Reefer |
41800637 |
R3-12F13.7VBGD |
3 Years from date of purchase |
PRO Solar Panel 15ft Reefer |
41800827 |
R3-12F13.7VBGDA |
3 Years from date of purchase |
PowerFilm Warranty Replacement
The duration of the Limited Warranty is from the date of initial purchase from PowerFilm, Inc. The foregoing warranty does not apply to any defect, failure, or damage caused by improper use, unauthorized modifications, neglect, improper testing, attempt to repair inadequate maintenance, or damage from accident, fire, abuse, or other hazards. PowerFilm's sole obligation and liability is internal component failure. Provided that the warranty procedures has been followed, it shall be at PowerFilm’s decision to either repair the products or replace the defective product with a new or remanufactured equivalent at no charge.
Customers are encouraged to read all the warranty covers via the link (https://www.powerfilmsolar.com/explore/warranty).
In order for a customer to obtain warranty, contact PowerFilm Solar at:
Phone: (515) 292-7606
Address:
PowerFilm Solar, Inc,
1287 XE Place
Ames, Iowa, 50014
PRO 12V Battery: Parts and Warranty
Mighty Max
Parts Description |
FleetPulse Part Number |
Supplier Part Number |
Warranty Time Frame |
PRO 12V Battery Lead Acid |
41321365 |
ML22-12 |
1-year |
PRO 12.8V Battery Lithium |
40001812 |
ML18-12LI |
5-years |
Mighty Max Warranty Replacement
The shelf life of Mighty Max batteries last two years when not in use. It is recommended to charge them every 6 months to keep them at full charge while in storage.
Mighty Max offers a 1-year warranty for SLA batteries and 5-years for LifePO04 batteries. Warranty will apply to all defective batteries and will not cover those that fail due to misuse or by overcharging.
For warranty claims, contact:
Jeremiah Bennet, Jeremiah@ecomelectronics.com
Josh Drillick, Josh@ecoelctronics.com
Phone: (718) 504-7324
Address:
3775 Park Avenue Unit 3
Edison, NJ 08820
PRO Hardware: Warranty and Parts
3D Designs Inc.
Parts Description |
FleetPulse Part Number |
Supplier Part Number |
Warranty Time Frame |
PRO Battery Mount Cradle |
40105399 |
40106868G00 |
Made to OEM Spec |
PRO Battery Mount Retainer |
40104364 |
40106869G00 |
Made to OEM Spec |
PRO Swing Door Sensor Bracket |
41800192 |
41800192 |
Made to OEM Spec |
Additional Hardware Warranty Replacement
Hardware provided for FleetPulse are manufactured to OEM design. Part defects can be identified and reported to the manufacturer upon receiving or first-time installation.
For warranty claims, contact:
Shawn Kamm, shawn.Kamm@3ddesignsinc.com
Luke Heaton, luke.heaton@3ddesignsinc.com
Phone: 402-563-1556
Address:
1520 25th Street
Columbus, NE 68601
PRO Battery Cover: Warranty and Parts
Tramec
Parts Description |
FleetPulse Part Number |
Supplier Part Number |
Warranty Time Frame |
PRO 12V Battery Plastic Cover |
41301038 |
P-80-157 |
Made to OEM Spec |
Tramec Warranty Replacement
Hardware provided for FleetPulse are manufactured to OEM design. Part defects can be identified and reported to the manufacturer upon receiving or first-time installation.
For warranty claims, contact:
Customer Support, customerservice@tramec.com
Phone: 800-336-7778
10. Product Support
For more information on this product, please contact support@fleetpulse.com.
Thank you for your business.
FleetPulsePRO
Download a copy here: