FleetPulseGO: Solar Troubleshooting
Learn how to troubleshoot solar issues using FleetPulseGO, improving fleet efficiency and reducing downtime.
Written by Randy French
Updated at August 20th, 2025
Table of Contents
FleetPulseGO: Solar Telematics Gateway
Troubleshooting Guide
- Verify the installation location of the FleetPulseGO: Solar device. The recommended installation location is on the roof of the trailer.
- Inspect the device for cracks or other damage.
- Verify that the solar panel of the device is clean and intact.
- Reset the device and check connectivity:
- Locate the button at the bottom of the device.
- Press and hold the button for 7 to 10 seconds and look for the light sequence. You should see GPS (green), cellular (blue), and Zigbee (amber). The lights will remain on until a cellular signal blockage has been achieved.
- Place the device in sunlight and after 24 hours, log in to the FleetPulse platform and verify that the reporting data is accurate for the trailer.
- If these steps do not restore the functionality of the device, please let us know at support@fleetpulse.com immediately, and we will continue with the next steps.
LED Indicator Guide
LED |
Status |
Description |
Cellular (Blue) |
OFF |
No carrier / Denied Registration |
Fast Flashing |
Searching for a cellular network |
|
Medium Flashing |
Registered roaming |
|
Slow Flashing |
Registered home |
|
GPS (RGB Green) |
Solid |
Searching for satellite |
Slow Flashing |
GPS lock |
|
ZigBee (Auburn) |
Fast Flashing |
Pairing Initiated |
Download a copy here: