FleetPulseGO: CARGO VIEW

Press and hold the button on the CargoView Gateway until LEDs activate to start the commissioning process and follow the steps in the Xirgo Service App. The Gateway will activate and stay awake for 20 minutes before going back to sleep. Ensure constant power on via taillight voltage and keep pressing the button to keep the Gateway awake to finish commissioning.  

NOTE: Plug and power trailer 7-way nose box for taillights on. This will charge the CargoView's backup internal battery while performing the commissioning steps. Placing the trailer outside under open sky sunlight should also be performed before pressing the button and commissioning the solar panel to charge the battery and test its performance.  

QUALITY CHECK: If LEDs do not activate after holding the button, the Gateway's internal battery may need to be charged. Apply tail light power and/or place the trailer outside for solar charging for at least two hours, and try pressing the button again. If the device does not power on after charging for at least four hours, contact support@fletpulse.com for further guidance.  

NOTE: Download the Xirgo Service Mobile Application via Android.