FleetPulseGO: Track Gateway Troubleshooting

Published August 20th, 2025 by ZyEsha Jones

FleetPulseGO: Track Telematics Gateway  Press and hold the button until the green LED stops rapidly flashing.   Important Note If the button is not held long enough, the LED may flash green, then white or purple, and the activation will not complete.     The device will then begin connecting to GPS and Cellular networks.   Watch the LED sequence to

FleetPulseGO:Solar Wake Up/ Activation Button

Published August 29th, 2025 by ZyEsha Jones

FleetPulseGO: SOLAR ACTIVATION After pairing the GO: Solar device, boot up the device by simply holding the Wake-Up Button located near the circular connector on the side panel of the device for 3-5 seconds. You should see the blue “C” LED light up and then fade out. The blue LED will blink when the device is successfully connected to the network.  

FleetPulse: CargoView Wakeup/Activation

Published August 29th, 2025 by ZyEsha Jones

FleetPulseGO: CARGO VIEW                                         Press and hold the button on the CargoView Gateway until LEDs activate to start the commissioning process and follow the steps in the Xirgo Service App. The Gateway will activate and stay awake for 20 minutes before going back to sleep. Ensure constant power on via taillight voltage an