FleetPulse CargoView Wakeup/Activation
How to successfully commission a Cargo View device with FleetPulse & Xirgo
Written by ZyEsha Jones
Updated at February 4th, 2026
Table of Contents
FleetPulse CargoView
NOTE: To commission a new device, download the Xirgo Service Mobile Application via Android and contact support@xirgo.com for access.
Press and hold the button on the CargoView Gateway until LEDs activate to start the commissioning process and follow the steps in the Xirgo Service App. The Gateway will activate and stay awake for 20 minutes before going back to sleep. Ensure constant power on via tail light voltage and keep pressing the button to keep the Gateway awake to finish commissioning.
Tips
- Plug and power trailer 7-way nose box to the tail lights. This will charge the CargoView's backup internal battery.
- Park the trailer outside under open sky and sunlight for solar panel to charge the battery and test its performance.
QUALITY CHECK
If LEDs do not activate after holding the button, the Gateway's internal battery may need to be charged. Apply tail light power and/or place the trailer outside for solar charging for at least two hours, and try pressing the button again. If the device does not power on after charging for at least two hours, contact support@fletpulse.com for next steps.