How to Pair a FleetPulseGO: Solar

Learn how to easily pair your FleetPulseGO solar device for efficient fleet management and optimization.

Updated at August 14th, 2025

+ More

Table of Contents

IMPORTANT NOTE

Prerequisite: To perform this function, you must be assigned as an Installer of the customer account.

Before the device can transmit updates to the platform:
1. It must establish a GPS fix and connect to a cellular network.
2. Signal acquisition is highly dependent on the device’s location and the strength of GPS and cellular signals in the area.
3. If your device does not report immediately, do not panic.
If the status LEDs do not illuminate when the button is pressed:
1. The internal battery may be dead.
2. Position the device with its solar panel facing direct sunlight and allow it to charge for several hours before attempting activation again.
Contact support@fleetpulse.com if you have further questions.

Download a copy here:

Prerequisite: To perform this function, you must be assigned as an Installer of the customer account.

connect sync pairing go solar solar

Log into the FleetPulse mobile app	Select GO Solar	Review Installation Tips & Proceed
Scan / Enter Trailer VIN & Proceed	Scan / Enter the device IMEI # & Proceed	After successfully pairing, Push and hold the button for three seconds

Contact Us